Corona BikeCorona BikeCorona BikeCorona Bike

IDEAL USES

  • Mountain Bike
  • Road Bike

SHOP

Buy Now Shopatron

Shop Local Dealers

Shop Online Deals

You need flash player installed to view this content

COLORS

  • BlackBlack
  • GreenGreen

SPECIFICATIONS

POWER90 Lumens
LAMP8 5MM Ultrabright LEDs
BURN TIME160 Hours
BATTERIES8 AA Alkaline or Lithium
WEIGHT250 Grams

CARACTERÍSTICAS TÉCNICAS

POTENCIA MÁXIMA90 Lumens
BOMBILLAS8 5MM Ultrabright LEDs
AUTONOMÍA160 Hours
PILAS8 AA Alkaline or Lithium
PESO250 Grams

CORONA BIKE

The Corona Bike is a commuter’s dream and perfect for lighting up the trail. With the ability to switch between 8-, 5-, 3-, or 1-LED output, the Corona Bike allows you to choose the amount and type of light to satisfy every task. The varying levels of output and number of LEDs chosen create a wide variety of burn times, beam patterns and energy consumed.

 

Includes helmet and handle bar attachments.

CORONA BIKE

  • 8 Ultrabright LEDs
  • 8-AA
  • HEATSINK TECHNOLOGY
  • Lumen 90
  • MULTIPLE BEAMS
  • MULTIPLE MODES
  • REGULATED LED / CONSTANT BRIGHTNESS
  • UL CERTIFICATION
  • WATERPROOF - LEVEL 1
  • Weight - 382

8 Ultrabright LEDs

The highest quality LED available, the Ultrabright LED is bright and efficient. The smooth, white, wide-beam light emitted by Ultrabright LEDs is ideal for close to mid-range tasks. Ultrabright LEDs are usually grouped together to offer a more powerful light source. Advances currently underway will continue to improve the effi ciency and brightness of Ultrabright LEDs.

 

8-AA

8 AA Alkaline

 

HEATSINK TECHNOLOGY

Princeton Tec has developed proprietary ultralight heatsinks to protect LED products from overheating. Even though LEDs operate at much lower temperatures than traditional incandescent bulbs, they still generate heat. If this heat is not dissipated, the LED will suffer irreversible damage. By using heatsinks, Princeton Tec lights can burn at extreme brightness levels for long periods of time. The heatsink may be incorporated internally or externally depending on the product and its application.

Lumen 90

The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.

 

MULTIPLE BEAMS

This beam pattern combines focused narrow and focused wide beams to allow for the most versatility. At close range, the focused wide beams simulate normal daylight conditions so you can take advantage of your peripheral vision. The focused narrow beams create a long-throw spotlight ideal for night hiking and search and rescue.

MULTIPLE MODES

Multiple settings on many of our products give you the flexibility to adjust your light’s brightness and/or beam width to illuminate greater distances or to conserve battery power, depending on your needs.

REGULATED LED / CONSTANT BRIGHTNESS

Princeton Tec lights that feature regulated LEDs have a sophisticated regulating circuit that maintains initial brightness as long as the batteries have sufficient voltage. Traditional lights are very bright initially, but immediately begin to dim and continue to dim until the batteries are drained. Constant Brightness is a term used to describe products that have regulated LEDs.

UL CERTIFICATION

Underwriters Laboratories Inc. (UL) is an independent, not-for-profit product-safety testing and certification organization. They have been testing products for public safety for more than a century. In order for a product to bear the certified UL Mark, it must pass all UL requirements at their testing facility. Princeton Tec lights that are UL certified fall into one of the following classifications: Class I – Division II – Groups A, B, C, & D or Class II - Division II – Groups F, & G. Refer to the comparison chart in the rear of the catalog. Class I – Division II – Groups A,B,C,& D will be noted with one (+) Class II – Division II – approved for Groups F, & G, will be noted with two (++).

WATERPROOF - LEVEL 1

Level 1 is assigned to lights that offer a degree of water protection equivalent to IPX4 in the International Electrotechnical Commission (IEC) standards. Lights rated at Level 1 are designed for water resistance to splashing and quick dunkings. If a light with a Level 1 rating is accidentally submerged for a longer period of time, the batteries should be removed and the cabinets should be carefully inspected for signs of battery leakage. If water has entered the housing, the light should be dried and batteries replaced.

Weight - 382

Princeton Tec’s advertised product weights always include batteries. For many products, battery weight is a large percentage of overall weight. Weight can be significantly reduced by using lithium batteries in lithium-compatible products.